Communicators
are winners!
News
![Sovereign Metals Limited](tl_files/logos/AU000000SVM6.gif)
- Latest drill results increase the drill-defined rutile mineralised envelope by 28% to 165km2
- Kasiya and Nsaru deposits have now coalesced into the Kasiya-Nsaru rutile deposit – a single, very large, coherent, high-grade body of near surface rutile and graphite mineralisation
- New drilling has encountered the highest-grade rutile results to date at Nsaru and at a new extension east of Kasiya. Highlights include:
- 11m @ 1.34% inc. 2m @ 3.00% rutile - 8m @ 1.36% inc. 2m @ 2.66% rutile - 12m @ 1.46% inc. 4m @ 2.42% rutile | - 12m @ 1.27% inc. 3m @ 2.16% rutile - 7m @ 1.84% inc. 4m @ 2.71% rutile - 13m @ 1.48% inc. 5m @ 2.23% rutile |
- Discovery of numerous extensions and new blocks of mineralisation expected to add substantially to upcoming Mineral Resource Estimate update
- Results affirm the strategic and global significance of Kasiya as the largest undeveloped natural rutile project in the world and first major rutile discovery in over half a century
- Updated Scoping Study underway focused on incorporating the growing resource base
15 March 2022 - Sovereign Metals Limited (ASX:SVM; AIM:SVML) (Sovereign or the Company) is pleased to report results from its H2 2021 drilling program at Kasiya-Nsaru, the Company’s flagship, very large, high-grade rutile deposit in Malawi.
The results, including numerous spectacular intercepts, will underpin the pending Mineral Resource Estimate (MRE) upgrade which is expected to significantly increase in both the Indicated and Inferred categories.
The most recent core and auger drilling has now expanded the total mineralised envelope to 165km2, up 28%. The previous MRE included just 49km2 of the mineralised envelope, hence significant resource tonnage growth can be expected.
Sovereign’s Managing Director Dr Julian Stephens commented: “The results of the latest drilling program have surpassed all of our expectations. Not only did we encounter the highest rutile grades to date, but the coalescing of the Kasiya and Nsaru deposits supports our belief that we have the single largest rutile deposit in the world on our hands. We are looking forward to announcing the updated Mineral Resource Estimate in the coming weeks.”
ENQUIRIES
Dr Julian Stephens (Perth)
Managing Director
+61(8) 9322 6322
Sam Cordin (Perth)
+61(8) 9322 6322
Sapan Ghai (London)
+44 207 478 3900
KASIYA-NSARU
Sovereign now has a total of ~165km2 of drilled, high-grade rutile mineralisation with the latest results succeeding in joining Kasiya and Nsaru into a single deposit (Figure 1).
Rutile mineralisation lies in laterally extensive, near surface, flat “blanket” style bodies in areas where the weathering profile is preserved and not significantly eroded. The Kasiya-Nsaru deposit is expansive with high-grade mineralisation commonly grading 1.2% to 2.0% rutile in the top 3-5m from surface. Moderate grade mineralisation generally grading 0.5% to 1.2% rutile commonly extends from 5m to end of hole where it remains open at depths >10m in numerous areas.
Kasiya-Nsaru is a strategic and globally significant natural rutile deposit with substantial additional resource growth expected. Kasiya’s current Mineral Resource Estimate is 605Mt at 0.98% rutile (0.7% cut-off, Indicated + Inferred, Table 1).
The core and auger drilling program at the Kasiya-Nsaru rutile deposit was completed from July to September 2021. This very large and expansive drilling program targeted significant MRE expansion as well as infill core drilling designed to bring known high-grade areas into the Indicated resource category. A total of 712 drill-holes for 6,832m are reported (Figure 4). Of these, 96 were core holes for 999m, and 616 are hand-auger holes for 5,833m.
Figure 1: Kasiya-Nsaru drill defined mineralised footprint in relation to the current MRE
SPECTACULAR RESULTS
Results from significant new extensions including the eastern portion of Kasiya as per below, with full results listed in Table 2:
- 11m @ 1.34% inc. 2m @ 3.00% rutile - 8m @ 1.36% inc. 2m @ 2.66% rutile - 12m @ 1.46% inc. 3m @ 2.42% rutile | - 12m @ 1.27% inc. 3m @ 2.16% rutile - 12m @ 1.26% inc. 5m @ 1.67% rutile - 12m @ 1.34% inc. 5m @ 1.65% rutile |
Results from 400m x 400m core and auger resource drilling at the large and high-grade Nsaru deposit including those listed below, with full results listed in Table 2:
- 7m @ 1.84% inc. 4m @ 2.71% rutile - 12m @ 1.44% inc. 3m @ 2.47% rutile - 10m @ 1.28% inc. 2m @ 2.36% rutile - 13m @ 1.48% inc. 5m @ 2.23% rutile - 10m @ 1.49% inc. 4m @ 2.01% rutile - 10m @ 1.44% inc. 4m @ 2.01% rutile | - 13m @ 1.29% inc. 4m @ 1.94% rutile - 12m @ 1.35% inc. 4m @ 1.90% rutile - 12m @ 1.38% inc. 6m @ 1.83% rutile - 13m @ 1.35% inc. 4m @ 1.81% rutile - 11m @ 1.35% inc. 4m @ 1.74% rutile - 9m @ 1.35% inc. 4m @ 1.71% rutile |
Figure 2: DL650 push-tube core drilling rig in operation at Kasiya-Nsaru
DRILLING RESULTS
The Kasiya and Nsaru rutile deposits have now coalesced into one very large, coherent, high-grade zone of near surface rutile and graphite mineralisation believed to be the single largest rutile deposit in the world.
The drilled mineralised footprint has now grown to 165km2, an increase overall of 28% from previously. Importantly, the drilling has also substantially increased the area of mineralisation drilled at 400 x 400m or greater density and thus it is expected that substantial tonnages will be able to be added in the upcoming MRE, due to be reported in the coming weeks. For reference, the previous MRE covered just 49km2 of the mineralised footprint.
Numerous new areas have also received drilling at 400 x 400m or greater density and are expected to be able to be incorporated into the upcoming the MRE upgrade.
In many of the high-grade zones identified by drilling rutile mineralisation persists and remains open at depth, at the limit of the current drilling (Figures 5 & 6). It is therefore considered likely that rutile mineralisation should occur down to approximately the base of the saprolite zone, which is estimated to lie at about 25m vertical depth. These deeper zones represent the key targets for the planned 2022 air-core drilling program.
Coarse flake graphite is present in all holes in broad association with rutile mineralisation. Graphite grades average about 1% TGC through the mineralised area.
Figure 3: Mangaging Director, Julian Stephens reviewing hand auger samples at Kasiya during a recent trip to Malawi
CONCLUSION
The significant 2021 H2 drilling program at Kasiya and Nsaru accomplished the following;
- Achieved a substantial 28% increase in the overall mineralised envelope to 165km2
- Brought a significant portion of the mineralised envelope to 400 x 400m drill spacing or greater density in order to be considered for the upcoming MRE update
- Identified numerous new areas of high-grade rutile mineralisation not previously known or not previously included in the prior MRE
The updated JORC MRE is due in the coming weeks and will serve as the basis for an updated Scoping Study targeted for completion in Q2 2022. This updated Study will build on the December 2021 Study, with the new MRE likely to allow higher grades to be mined, or increased production rates or increased mine life, or a combination.
Figure 4: Kasiya-Nsaru drilling location map showing the very large areas of drilling outside the current MRE.
Figure 5: Cross section 8,478,400mN from the new discovery to the eastern side of Kasiya.
Figure 6: Cross section 8,471,800mN from Nsaru.
Competent Persons Statement
The information in this report that relates to Exploration Results is based on information compiled by Mr Samuel Moyle, a Competent Person who is a member of The Australasian Institute of Mining and Metallurgy (AusIMM). Mr Moyle is the Exploration Manager of Sovereign Metals Limited and a holder of ordinary shares and unlisted options in Sovereign Metals Limited. Mr Moyle has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves'. Mr Moyle consents to the inclusion in the report of the matters based on his information in the form and context in which it appears.
The information in this announcement that relates to Sovereign’s Mineral Resource Estimate is extracted from the ASX announcement dated 16 December 2021 which is available to view at Sovereign’s website at www.sovereignmetals.com.au. Sovereign confirms that a) it is not aware of any new information or data that materially affects the information included in the ASX announcement; b) all material assumptions included in the ASX announcement continue to apply and have not materially changed; and c) the form and context in which the relevant Competent Persons’ findings are presented in this report have not been materially changed from the ASX announcement.
Forward Looking Statement
This release may include forward-looking statements, which may be identified by words such as "expects", "anticipates", "believes", "projects", "plans", and similar expressions. These forward-looking statements are based on Sovereign’s expectations and beliefs concerning future events. Forward looking statements are necessarily subject to risks, uncertainties and other factors, many of which are outside the control of Sovereign, which could cause actual results to differ materially from such statements. There can be no assurance that forward-looking statements will prove to be correct. Sovereign makes no undertaking to subsequently update or revise the forward-looking statements made in this release, to reflect the circumstances or events after the date of that release.
This ASX Announcement has been approved and authorised for release by the Company’s Managing Director, Dr Julian Stephens.
Please follow the link to view entire original news in English language:
NEWSLETTER REGISTRIERUNG:
Aktuelle Pressemeldungen dieses Unternehmens direkt in Ihr Postfach:
Newsletter...
Mitteilung übermittelt durch IRW-Press.com. Für den Inhalt ist der Aussender verantwortlich.
Kostenloser Abdruck mit Quellenangabe erlaubt.